Skip to main content

Visit to an artist's studio: Josh Garber

Bequeath, 51" x 48" x46", tree branches, electrical cable, electrical conduit, coaxial wire, packing tape,
bubble wrap, shrink wrap, magazine paper, t-shirts, shoes, beer cans, soda bottle, stuffed animals, injected ink
I attended a gathering in the studio of sculptor Josh Garber about a week ago, and this piece caught my eye.
Close-up
It's a wild, free form accumulation of the cheapest, throw-away materials, wound round tree branches and taped any old way to hold them into place. The list of materials on the caption to the first photo suggests that they might be a classic representation of what an artist wears, eats, and drinks nowadays (with the exception of electrical wire, perhaps). If you follow the link to his website, then look again at this new work, you'll see that it's a departure from previous work. But the more I look at it, the more I see the relation to Josh's other sculptures. His public art pieces may be made from aluminum, but they have the same looping and winding forms, and the appearance of material that may be hammered into the forms, or exploding outward from them. Notice how this trash sculpture similarly appears to be lifting up and pushing outwards.

He hasn't decided yet when this piece is finished, or where the series will end up, which is the natural way to proceed. There was conversation about casting it in bronze, which would be a striking conclusion. In it's current form, though, it's clear evidence of an inquisitive mind that's not satisfied with previous conclusions, and is open to posing new questions to itself.

Popular posts from this blog

Restoring my Printing Press

I've just finished restoring and assembling my large etching press -- a six week process involving lots of rust removal, scrubbing with steel wool, and repainting. Here is a photo of the same kind of press from the Chicago Printmakers Collaborative: And here is a short YouTube video of me testing the press, making sure the motor still works after nearly seven years of lying in storage:

Brancusi in Plastic

Artist Mary Ellen Croteau is showing these columns made from recycled plastic cartons and lids in the window of the Columbia College bookstore on Michigan Avenue. They are a playful homage to Brancusi's "Endless Columns", with a serious environmental message for our times: Image copyright Inhabitat.com and Mary Ellen Croteau Mary Ellen also runs a wonderful experimental art gallery in a window space in west Chicago, called Art on Armitage . I will be exhibiting a mixed media piece there during August 2012.

How to etch a linoleum block

Linoleum as a material for printmaking has been used for nearly a hundred years now. Normally, you cut an image out using special gouges similar to woodcut tools, cutting away the lino around the image you want to print. This is called relief printmaking, because if you look at the block from the side, the material that remains stands up in relief from the backing material. You then roll ink with a brayer over the surface of the block, place paper over it, and either print by hand or run it through a press. You can do complex things this way (for example, reduction linocuts), but the beauty of the process is that it is quick, simple, and direct. Incised lino block, from me.redith.com Etched lino block, from Steve Edwards A few years ago, I saw some prints that were classified as coming from etched linoleum blocks, and I loved the textures I saw in them. In the last few months, I've been trying to use this technique in my own studio, learning about it as one does these d