Skip to main content

Collagraphs and drypoint, cont.

Back in the world of the non-toxic printmaking, I got some great advice from printmaker and blogger Aine Scannell a few days ago. I've been looking for ways to reproduce aquatint tones on a collagraph plate. I was experimenting with different strengths of acrylic resist mixed with carborundum, but she suggested I use pastel ground. Pastel ground already contains minute particles of grit which will hold a lot of ink when dried on a printing plate. On the following two plates, I used straight pastel ground for one of the figures, and a tiny amount added to water for the background shapes:
 

Result: a beautiful variation in tonality, pretty similar to an aquatint. Adding some lines scratched into the Lascaux resist in other parts of the plate leads to even more variety and lusciousness of mark making.

I am heading out of Chicago next week to go and teach a monotype class in northern Michigan, so I will mainly be brushing up that technique. But these prints represent another breakthrough for me with collagraph printmaking, one which I will pick up in earnest when I return to my studio after the workshop has ended.

Popular posts from this blog

Restoring my Printing Press

I've just finished restoring and assembling my large etching press -- a six week process involving lots of rust removal, scrubbing with steel wool, and repainting. Here is a photo of the same kind of press from the Chicago Printmakers Collaborative: And here is a short YouTube video of me testing the press, making sure the motor still works after nearly seven years of lying in storage:

Brancusi in Plastic

Artist Mary Ellen Croteau is showing these columns made from recycled plastic cartons and lids in the window of the Columbia College bookstore on Michigan Avenue. They are a playful homage to Brancusi's "Endless Columns", with a serious environmental message for our times: Image copyright Inhabitat.com and Mary Ellen Croteau Mary Ellen also runs a wonderful experimental art gallery in a window space in west Chicago, called Art on Armitage . I will be exhibiting a mixed media piece there during August 2012.

How to etch a linoleum block

Linoleum as a material for printmaking has been used for nearly a hundred years now. Normally, you cut an image out using special gouges similar to woodcut tools, cutting away the lino around the image you want to print. This is called relief printmaking, because if you look at the block from the side, the material that remains stands up in relief from the backing material. You then roll ink with a brayer over the surface of the block, place paper over it, and either print by hand or run it through a press. You can do complex things this way (for example, reduction linocuts), but the beauty of the process is that it is quick, simple, and direct. Incised lino block, from me.redith.com Etched lino block, from Steve Edwards A few years ago, I saw some prints that were classified as coming from etched linoleum blocks, and I loved the textures I saw in them. In the last few months, I've been trying to use this technique in my own studio, learning about it as one does these d