Skip to main content

A New Place


I moved studios nine days ago,and am currently in the middle of setting things up in the new space. It's a process that will probably take until the end of the month, which in turn means that I won't get seriously into making new work until March. This is one of the reasons why I postponed moving from my last studio in Wicker Park, even though that one had been very unsuitable for me for a long time: I hate the whole moving thing, the waste of time involved in packing up boxes, throwing things out, moving, and unpacking the boxes at the other end.

But it's done, and now I have a clean slate to set up a new space in the way I want, and to try to get it right this time. The ceilings are very high in this space, so no more scraping the flesh off my scalp like I did many times in the previous space. I've got a printmaking area set up already (see photo above), and on Sunday I decided to give it a test drive, using an etching that I made in 1998:


It's a four inch x four inch copper plate, with a deep aquatint on it created by a combination of sugarlift, and marbling the plate by dabbing it onto stop-out resist floating on the surface of water in a dish (to create that swirling pattern).

The print that I took from the plate was as crisp as fifteen years ago:


So that's another piece of great advice that I got from my printmaking teacher in London: to preserve copper plates for a long time from oxidization (which turns the plates green, like statues left out in the open for centuries): coat the plates with a thick layer of vaseline.

Popular posts from this blog

Restoring my Printing Press

I've just finished restoring and assembling my large etching press -- a six week process involving lots of rust removal, scrubbing with steel wool, and repainting. Here is a photo of the same kind of press from the Chicago Printmakers Collaborative: And here is a short YouTube video of me testing the press, making sure the motor still works after nearly seven years of lying in storage:

Brancusi in Plastic

Artist Mary Ellen Croteau is showing these columns made from recycled plastic cartons and lids in the window of the Columbia College bookstore on Michigan Avenue. They are a playful homage to Brancusi's "Endless Columns", with a serious environmental message for our times: Image copyright Inhabitat.com and Mary Ellen Croteau Mary Ellen also runs a wonderful experimental art gallery in a window space in west Chicago, called Art on Armitage . I will be exhibiting a mixed media piece there during August 2012.

How to etch a linoleum block

Linoleum as a material for printmaking has been used for nearly a hundred years now. Normally, you cut an image out using special gouges similar to woodcut tools, cutting away the lino around the image you want to print. This is called relief printmaking, because if you look at the block from the side, the material that remains stands up in relief from the backing material. You then roll ink with a brayer over the surface of the block, place paper over it, and either print by hand or run it through a press. You can do complex things this way (for example, reduction linocuts), but the beauty of the process is that it is quick, simple, and direct. Incised lino block, from me.redith.com Etched lino block, from Steve Edwards A few years ago, I saw some prints that were classified as coming from etched linoleum blocks, and I loved the textures I saw in them. In the last few months, I've been trying to use this technique in my own studio, learning about it as one does these d